HP-250 Medicine Envelope Making Machine

HP-250 Medicine Envelope Making Machine Overview

The medicine envelope making machine from HAOXING is the HP-250 model. The HP-250 forms small open-end envelopes and paper packets for medicine, chopsticks and similar products. Air-suction feeding, folding, gluing, counting and delivery are combined in one line. The information below summarizes the manufacturer's published features and technical figures; please confirm the exact machine offered for your application.

How the HP-250 Fits Your Production

For an envelope-production project, start with the finished format, flap orientation and closure method. Specify the paper stock, finished dimensions and expected output before choosing a model. If an existing line already performs part of the job, check whether you need a full forming machine or only a finishing station. A sample blank and an example of the desired finished envelope help the manufacturer review the tooling and configuration.

For this envelope-making model, HAOXING specifically lists non-stop paper feeding and accurate sheet positioning; sponge-type gluing system designed for straightforward adjustment; integrated counting and delivery. These details describe the model family and are a basis for discussion, not a promise that every optional function is included. Confirm the configuration, tooling and materials on your quotation.

Key Features

• Non-stop paper feeding and accurate sheet positioning
• Sponge-type gluing system designed for straightforward adjustment
• Integrated counting and delivery

HP-250 Technical Specifications

Important published selection points include paper weight of 50–157 gsm, envelope size of 30 × 50 to 120 × 250 mm, listed capacity of 5,000–22,000 pieces/hour. Where the table gives several values separated by model, each value belongs to the corresponding variant in the same order. Do not treat the largest figure from one variant as a specification for all variants.

Published values may vary by configuration, material and operating conditions. Request a current technical sheet, production trial and final machine drawing before ordering or preparing factory utilities. The figures here are for model comparison and are not a substitute for the confirmed quotation.

Production Planning and Quality Checks

During a trial, assess sheet feeding, register, fold alignment, adhesive placement and delivery quality using your actual stock. Published production rates are reference figures, not a guarantee for every paper and size. Ask for the operating conditions behind a quoted rate and verify the result on your own material.

Before selecting the HP-250, provide the finished-product dimensions, input material specifications, target output and a sample of the product you want to make. HAOXING can then check whether the published range covers your application and identify any optional systems or changes needed. Ask for an agreed test method, including how acceptable quality and output will be measured.

Compare and Enquire

See more HAOXING envelope-making machines in this product category. Contact us with drawings or samples to confirm the current configuration, lead time and quotation.

Frequently Asked Questions

What can the HP-250 make?

Small open-end envelopes, medicine packets, chopstick bags and similar paper packets.

What paper weight does it accept?

The published range is 50–157 gsm. Confirm your exact paper and format before ordering.