ZF-480/A Peel-and-Seal Wallet and Pocket Envelope Making Machine

ZF-480/A Peel-and-Seal Wallet and Pocket Envelope Making Machine Overview

The peel and seal wallet envelope making machine from HAOXING is the ZF-480/A model. The ZF-480 and ZF-480A produce wallet and pocket envelopes with peel-and-seal tape. The line integrates suction feeding, folding, gluing, tape application, counting and delivery. The information below summarizes the manufacturer's published features and technical figures; please confirm the exact machine offered for your application.

How the ZF-480/A Fits Your Production

For an envelope-production project, start with the finished format, flap orientation and closure method. Specify the paper stock, finished dimensions and expected output before choosing a model. If an existing line already performs part of the job, check whether you need a full forming machine or only a finishing station. A sample blank and an example of the desired finished envelope help the manufacturer review the tooling and configuration.

For this envelope-making model, HAOXING specifically lists inline tape application for peel-and-seal closure; wallet and optional pocket-envelope formats; continuous feeding with precise sheet positioning. These details describe the model family and are a basis for discussion, not a promise that every optional function is included. Confirm the configuration, tooling and materials on your quotation.

Key Features

• Inline tape application for peel-and-seal closure
• Wallet and optional pocket-envelope formats
• Continuous feeding with precise sheet positioning

ZF-480/A Technical Specifications

Important published selection points include models of ZF-480 / ZF-480A, paper weight of 70–150 gsm, listed capacity of 3,000–10,000 / 3,000–8,000 pieces/hour. Where the table gives several values separated by model, each value belongs to the corresponding variant in the same order. Do not treat the largest figure from one variant as a specification for all variants.

Published values may vary by configuration, material and operating conditions. Request a current technical sheet, production trial and final machine drawing before ordering or preparing factory utilities. The figures here are for model comparison and are not a substitute for the confirmed quotation.

Production Planning and Quality Checks

During a trial, assess sheet feeding, register, fold alignment, adhesive placement and delivery quality using your actual stock. Published production rates are reference figures, not a guarantee for every paper and size. Ask for the operating conditions behind a quoted rate and verify the result on your own material.

Before selecting the ZF-480/A, provide the finished-product dimensions, input material specifications, target output and a sample of the product you want to make. HAOXING can then check whether the published range covers your application and identify any optional systems or changes needed. Ask for an agreed test method, including how acceptable quality and output will be measured.

Compare and Enquire

See more HAOXING envelope-making machines in this product category. Contact us with drawings or samples to confirm the current configuration, lead time and quotation.

Frequently Asked Questions

What closure does this machine produce?

A peel-and-seal tape closure on wallet or pocket envelopes.

Are both variants the same size?

No. The ZF-480A is listed for larger optional pocket-envelope formats; confirm dimensions before selecting a model.